*Read all information and instructions carefully before proceeding.*
- Remove the screw cap from the plastic collection container and fill the container with room temperature water up to the fill line.
- Check the temperature of the temperature strip on the container.
- If the temperature is not in the optimal range of 94-100’F use one of the two heating methods below
The following heat sources can be used either on their own or combined in order to reach the optimal temperature
1. THE HEAT PAD
Open the packaging and remove the paper backing from the sticky side. Apply the the heat pad directly to the bottle on the opposite side to the temperature strip. Allow up to 1 hour for the heat pad to reach the optimal temperature.
2. THE HEAT ACTIVATOR
If you do not see any temperature reading, carefully add 1/3 of the powder into the mixing container. If the temperature indicates 82′-92’F add 1/4 of the the powder instead. Tighten the cap gently, shake and wait 15-20 seconds before taking a new temperature reading.
If necessary repeat the process by adding 1/4 of the heat activator powder.
*Please use responsibly – our products are not intended to be used on lawfully administered tests and is to be used in accordance with all federal and state laws.